widos 8000 WM SPA, Working Instructions Translation

Page: 14 / 114

Safety rules Chapter 2
09.06.15 Working Instructions WIDOS 8000 WM SPA page 14 of 108
2.7. Dangers while handling the machine
The machine WIDOS 8000 WM is constructed according to the latest technical standard and the
acknowledged technical safety rules.
However, dangers for the operator or other persons standing nearby may occur. Also material damages are
possible.
The machine may only be used

according to the purpose-oriented use

in safety technical impeccable status
Disturbances which may affect the safety of the machine must be cleared immediately
Only skilled persons are allowed to work at electrical appliances.

The electrical equipment of the machine has to be checked regularly. Loose connections and damaged
cables have to be replaced immediately.

Protect the heating element and planer from rain and dropping water.
System sections which have to be opened in case of repair work have to be depressurized
before starting to repair.
There is a danger of hurting your eyes because of a sudden flow compressed air resp.
squirting hydraulic oil. The hydraulic oil can be hot!

Damaged hydraulic / pneumatic hoses have to be immediately replaced.

Before starting to work make a visual examination of the hydraulic / pneumatic lines.

The hydraulic oil is brackish!

The hydraulic oil is to be handled and disposed of in appropriate manner.
2.8. Specific dangers
2.8.1. Danger of stumbling over electric wires and hydraulic hoses

Pay attention that nobody has to step over the lines / hoses.

Favorably pass the lines / hoses in order that the danger is minimized.

Do not squeeze and kink the lines / hoses or anything likewise.

Avoid the heating-up of hydraulic hoses (rise in pressure!).
2.8.2. Danger of drawing-in of clothes by the planer
You can carry away cut injuries up to fractures!

Do wear formfitting clothes.

Do not wear any rings or jewelry during work.

If necessary wear a snood-type cap.

Take care that no person is standing in the swiveling area of the planer.

Only remove chips with the planer standing still.