widos 8000 WM SPA, Working Instructions Translation

Page: 8 / 114

Description of product Chapter 1
09.06.15 Working Instructions WIDOS 8000 WM SPA page 8 of 108
1.4.1. Technical data
All important technical data of the individual components is listed.
The data provides quick information on the capability and construction.
1.4.1.1. WIDOS 8000 General data
Material: PE, PP, PVC
Tube dimensions: OD = 500 – 1200 mm (900 mm)
Emissions: - Noise exceeding 80 dB (A) may occur; while planing it is obligatory
to wear ear protection!
- In case of use of the prescribed plastic materials and if the work is
performed inside the temperature range up to 260 °C / 500 °F no
toxic fumes will be generated.
Environmental conditions in the
welding area:
- Be aware of cleanliness (no dust at the welding point)
- Prevent from moisture influence
- If secured by an appropriate measurement that allowed conditions
for welding are indicated, it is possible to work in any outside
temperature condition as far as the welder is not constrained in its
manual skill.
Dimension (w x d x h): appr. 3200 x 5000 x 2700 mm (without operator control)
Feeding: 39 kVA / 380 V – 400 V / 50 Hz - 60 Hz
1.4.1.2. Basic frame / table
Material basic frame: Construction steel
Ø of cylinder- / Ø of piston rod: (2 pieces) 50 / 32 mm
max. force (F = P*A): 23,18 kN (at 100 bar)
1 bar at pressure gauge = 232 N
Additional Ø of cylinder- / Ø of piston rod: 50/ 32 mm
max. force include additional cylinder (F = P*A): 34,77 kN (at 100 bar)
1 bar at pressure gauge = 348 N
max. working pressure: 240 bar
1.4.1.3. Heating element
Power: 31,046 kW
Voltage: 380 V – 400 V
Current: 135 A / phase
Frequency: 50 Hz - 60 Hz
Surface: anti-stick coating