widos 8000 WM SPA, Working Instructions Translation

Page: 26 / 114

Operating and indicating elements Chapter 4
09.06.15 Working Instructions WIDOS 8000 WM SPA page 26 of 108
4.7.1. How to mount clamping tools on machine tables
Turning points for the clamping tools with 15° are located on the machine tables (1 / 2 / 3 / 4).

Screw the center bolts into the machine tables.

Place the clamping tools onto the center bolts.

Afterwards you can swivel the clamping tools to the desired welding angle, the angle is displayed with the
scale
.

Tighten the clamping tools with the turning points and additionally with the clamping jaws.
Illustration machine tables, view from above:
Illustration scale on right table:
Front scale, for non-exchanged clamping tools on turning point „1“
Rear scale, for exchanged clamping tools on turning point „1“
Turning point „1“:
- for straight pipes
- for angles up to 7,5 °
Turning point „2“: for
angles >7,5° up to 15°
Turning point „3“: for T-45°
welding, (2nd welding)
Turning point „4“: for T-60°
welding, (2nd welding
Front scale, for non-exchanged clamping tools
on turning point „2“
Rear scale, for exchanged clamping tools
on turning point „2“
Scale