Description of product
Chapter 1
23.06.2015
Working instructions WIDOS 5000 WM
Page 8 of 80
1.4.
Marking of product
The product is marked by type-label.
They contain the machine type, the serial number and the year of construction.
1.4.1.
Technical data
All important technical data of the single components are listed.
They permit a rapid information about output and structure.
1.4.1.1.
WIDOS 5000 WM general data
Material:
PP; PE, PVDF
Size of the pipe:
OD = 160 – 500 mm
Power:
400 V (± 10%)
Power:
11,0 kW
Frequency:
50 Hz (± 10%)
Connection:
CEE 32 A
Power section:
2,5 mm²
Weight:
appr. 900 kg (without package and accessories)
Dimensions (W x H x D)
1600 (1900 with T-60°) x 1500 x 2575 mm
Emissions
- Noise exceeding 80 dB (A) may occur; during planing it is
obligatory to wear ear protection!
- In case of use of the prescribed plastic materials and if the work
is performed inside the temperature range up to 260 °C no toxic
fumes will be generated.
Environmental conditions in the
welding area:
- Be aware of cleanliness (no dust at the welding point)
- If secured by an appropriate measurement that allowed
conditions for welding are indicated, it is possible to work in any
outside temperature condition as far as the welder is not
constrained in its manual skill.
- prevent from moisture influence
- avoid strong sun rays radiations
- prevent from strong wind
- Be careful when moving in and out heating element and planer
1.4.1.2.
Basic unit
Frame material:
Construction steel
Cylinder-
/ Piston rod-
:
35 / 18 mm
max. force (F = P*A):
14,2 kN at 200 bar
(1 bar on the pressure gauge = 71N)
Cylinder-Ø / Piston rod-Ø
Additional cylinder (optional):
25 / 18 mm
max. force with additional cylinder (F = P*A)
(optional):
18,8 kN at 200 bar
(1 bar on the pressure gauge = 94N)
