Operating and indicating elements
Chapter 4
23.06.2015
Working instructions WIDOS 5000 WM
Page 27 of 80
4.9.
Clamping tool on machine table
Illustration of right machine table, view from above
:
There are four turning points for the small and 15°
clamping tools on the right machine table (A / B / C / D).
The center bolt is screwed into the machine table, the
clamping tool is piled on the bolt and can be swiveled to
the desired welding angle.
Turning point + scale „A“: for angles = 0° - 15°
Turning point + scale „B“: for angles = 15° - 22,5°.
Turning point + scale „C“: for T-45°, 2
nd
welding
Turning point + scale „D“: for T-60°, 2
nd
welding
The scale "X" indicates the angle for 15° clamping tools.
The scale "Y" indicates the angle for small clamping tools.
Only turning points „A“ and „B“ on the left machine table.
4.9.1.
Clamping tools for straight pipes
Mount the clamping tools on turning point „A“.
Left clamping tool
Right clamping tool
