26
| CLEANING AND SANITIZING YOUR VESSI™ FERMENTOR & DISPENSER
CLEANING AND SANITIZING YOUR VESSI™
FERMENTOR & DISPENSER
4
Insert a large black o-ring into
the groove on the top of the clear
plastic ball�
Groove
Large
o-ring
5
Insert a white ball seat onto the top
of the clear plastic ball�
Repeat steps 4 and 5 for the bottom
ball seat�
White
ball seat
6
Place the double-ring gasket onto
the clear plastic ball� Ensure that
the gasket is positioned level on
the plastic ball�
7
Place the plastic ball assembly into
the bottom stainless steel end cap�
8
1 - Check that the smaller circle
on the gasket is tight against the
plastic ball assembly�
2 - Check that the gasket is fully
seated inside the stainless steel
end cap groove�
3 - Check that the small gasket
tabs on each side are fully seated
in the groove�
1
2
3
