page 1 – 9
VP-8IP / Sep 2013
G E N E R A L I N F O R M A T I O N
SCA In – BNC
Pin 1 BNC 1 HI – SCA 1 IN HI
Pin 2 BNC 1 SH – SCA 1 IN SH
Pin 1 BNC 2 HI – SCA 2 IN HI
Pin 2 BNC 2 SH – SCA 2 IN SH
Audio Outputs
Output audio is available as:
- Analog balanced left/right stereo.
- Analog balanced left/right stereo and de-emphasized according to any pre-emphasis
used.
- AES3 digital, either pre or post diversity delay, and/or de-emphasized according
to any pre-emphasis used.
- Balanced line level composite stereo.
- Composite stereo on two rear panel BNC female connectors.
- WheatNet-IP audio network.
Analog Out – XLR-M
Pin 1 XLR LT SH – LINE LT OUT SH
Pin 2 XLR LT HI – LINE LT OUT HI
Pin 3 XLR LT LO – LINE LT OUT LO
Pin 1 XLR RT SH – LINE RT OUT SH
Pin 2 XLR RT HI – LINE RT OUT HI
Pin 3 XLR RT LO – LINE RT OUT LO
AES / baseband192 Out – XLR-M
Pin 1 XLR SH – AES / BASEBAND192 OUT SH
Pin 2 XLR HI – AES / BASEBAND192 OUT HI
Pin 3 XLR LO – AES / BASEBAND192 OUT LO
TX Out – BNC
Pin 1 BNC 1 HI – TX 1 OUT HI
Pin 2 BNC 1 SH – TX 1 OUT SH
Pin 1 BNC 2 HI – TX 2 OUT HI
Pin 2 BNC 2 SH – TX 2 OUT SH
Headphones
A high-power, overload protected headphone
output is available on the front panel for local
monitoring. The headphone source can be selected
in software to be from one of six important signal
points inside the processing algorithm, including
both analog and AES inputs even if those inputs
are not selected to feed the audio processing chain.
