Wexxar WF-10T, Operation And Service Manual

Page: 73 / 156

WF-10T Case Former Case Size Adjustments
7-61
Check the ‘S’ box for Satisfactory Performance and ‘US’ box for Unsatisfactory Performance.
Table 16: Horizontal Pinblock Adjustments
Size Adjustments
Horizontal Pinblock Adjustment
S US
Ensure that the pinblocks on the major and minor jawplates do not
interfere with each other.
Adjust pinblocks on the major jawplate that interfere with those on the
minor jawplate sideways until they no longer cause interference.
For each misaligned pinblock, loosen the wingnut that secures the
pinblock to the major jawplate.
Tighten the loosened wingnuts to complete the horizontal adjustment.
To change the depth of penetration of the pins in the corrugate flutes,
pull out the selected pin ring on the out-facing side of the major
jawplate. Position pins in pinblocks to the optimal height for the
selected case size.
Ensure that there is under ½” of exposed pin at the bottom of the case
corrugate.