Wexxar WF-10T, Operation And Service Manual

Page: 60 / 156

WF-10T Case Former Operating Procedures
6-48
6.5
Shutdown
There are several options to stop the machine:
1.
‘STOP’ Button:
Pushing the
‘STOP’
button is the proper way to stop the machine in a
non-emergency situation. When the
‘STOP’
button is pressed in
AUTOMATIC CYCLE
mode operation, the case in process is completed, and the mechanisms return to their
HOME
positions.
2.
‘EMERGENCY STOP’ Button:
Pushing the
‘EMERGENCY STOP’
button stops the
machine rapidly regardless of where the machine is in its operating cycle. Air and
electrical power are removed from the machine mechanisms. Restarting the machine
after an emergency stop is more complex. Most likely the case that was being formed
will be wasted and have to be removed manually. Refer to Section 6.4:
‘Clearing a Case
Jam’
.
3.
Open a Guard Door:
Opening a guard door will stop the machine rapidly regardless
of where the machine is in its operating cycle, similar to actuating the
‘EMERGENCY
STOP’
button.
4.
Disconnect Switch:
Turning
OFF
the disconnect switch or any other means of
removing the electrical power will cause the machine to stop rapidly, similar to actuating
the
‘EMERGENCY STOP’
button.
5.
Turning OFF Pneumatic/Air Supply
:
Cutting off the compressed air supply to the
machine will cause it to halt operation, although the machine will still be electrically
powered.
Check the ‘S’ box for Satisfactory Performance and ‘US’ box for Unsatisfactory Performance.
Table 10: Machine Shutdown
Shutdown
S US
Stop the machine using the following techniques:
Press the
‘STOP’
button.
Press the
‘EMERGENCY STOP’
button.
Open a guard door.
Turn
OFF
the disconnect switch.
Disconnect the electrical power from the machine (optional).
NOTE: Normal stopping of the machine should be
accomplished by using the ‘STOP’ button.