30998 R1
35
Figure 23.
Installing the Hopper Springs and Shaft Brackets
3. Clip the hopper springs over the tabs on the hopper and shaft bracket (see
Figure 24
).
4. Fasten a 3/8" x 2-1/2" bolt (3), 3/8" washer (4), and 3/8" nut (5) on the shaft bracket such that the loop on
the spring captures the bolt.
Table 15.
Pivot Shaft Components
Item
Description
3
3/8" x 2-1/2" Hex Bolt
4
3/8" Flat Washer, Plated USS
5
3/8" Nylon Locknut
2
1
2
1
WCX 1335 TOP-DRIVE CONVEYOR – PORTABLE GRAIN BELT CONVEYOR
4. ASSEMBLY
