3. A
SSEMBLY
W
ESTFIELD
- GULP2 H
OPPER
MKX130
AND
MKX160 M
ODELS
28
30962 R1
3.4.6. Install the 3-Spool Valve (130/160)
The 3-spool valve mounts on the swing tube using two half-clamp bands.
1. Position the valve mount approximately 24" from transition attach plate.
2. Secure the valve mount to the swing tube:
a.
for MKX130 models,
use two 7/16" x 1-1/4" bolts and locknuts.
b.
for MKX160 models,
use four 7/16" x 1-1/4" bolts and locknuts.
3.
For MKX130 models only:
Position the line-block half clamps 24" from the
spout head. Secure the half-clamps to the swing tube using two 7/16" x 1-1/4"
bolts and locknuts.
Figure 3.10 Installing the 3-Spool Valve (130/160)
Figure 3.11 Installing Line-Block Half-Clamps (130)
7/16” X 1-1/4”
BOLTS AND LOCKNUTS
24”
24”
7/16” X 1-1/4”
BOLTS AND LOCKNUTS
Summary of Contents for GULP2 HOPPER MKX130
