3. A
SSEMBLY
W
ESTFIELD
- GULP2 H
OPPER
MKX130
AND
MKX160 M
ODELS
32
30962 R1
3.5. Install the Hydraulic Winch (130/160)
1. Position the hydraulic winch on the winch mounting plate, and secure it using
four 7/16” x 1-1/4” bolts and locknuts, as shown in Figure 3.14.
2. Feed the winch cable through the lift arm pulley, then feed the winch cable
under the spool and connect it to the spool (minimum 3 wraps around the
spool, feed cable through hole in side of spool, and secure with clamp and
clamp hardware) as shown in Figure 3.15.
3. Connect the hydraulic hoses to the winch, and install pioneer couplings on
the hose ends.
4. Thread both hoses through hydraulic hose upper catches on side of auger
lower tube and boot. Tighten hydraulic hose upper catches slightly to hold
hoses in place.
Figure 3.14 Installing the Hydraulic Winch
Summary of Contents for GULP2 HOPPER MKX130
