Westfield GULP2 HOPPER MKX130 Assembly & Operation Download Page 61

Page: 61 / 62

WARRANTY

Westfield Industries Ltd. warrants products of its manufacture against defects in materials or

workmanship under normal and reasonable use for a period of one year after date of delivery to the

original purchaser.

Our obligation under this warranty is limited to repairing, replacing, or refunding defective part or parts

which shall be returned to a distributor or a dealer of our Company, or to our factory, with transportation

charges prepaid. This warranty does not obligate Westfield Industries Ltd. to bear the cost of labor in

replacing defective parts. Any defects must be reported to the Company before the end of the one year

period.

This warranty shall not apply to equipment which has been altered, improperly assembled, improperly

maintained, or improperly repaired so as to adversely affect its performance. Westfield Industries Ltd.

makes no express warranty of any character with respect to parts not of its manufacture.

The foregoing is in lieu of all other warranties, expressed or implied, including any warranties that

extend beyond the description of the product, and the IMPLIED WARRANTY of MERCHANTABILITY

is expressly excluded.

WESTFIELD INDUSTRIES LTD.

ROSENORT, MANITOBA

CANADA

R0G 1W0

Summary of Contents for GULP2 HOPPER MKX130































































Search results

Summary of Contents for GULP2 HOPPER MKX130

Reviews:

Related manuals for GULP2 HOPPER MKX130

Brands by name

Popular brands

Westfield GULP2 HOPPER MKX130, Assembly & Operation

Search results

Summary of Contents for GULP2 HOPPER MKX130

Reviews:

Related manuals for GULP2 HOPPER MKX130

Brands by name

Popular brands