3. A
SSEMBLY
W
ESTFIELD
- GULP2 H
OPPER
MKX130
AND
MKX160 M
ODELS
20
30962 R1
3.3.2. Install the GULP2 Hopper Lift Arm (130/160)
During the assembly of the auger, ensure that the standard lift arm is replaced by the lift
arm listed in Table 3.3 below.
1. Position the hopper lift arm assembly on the GULP2 lift arm mount bracket
with the arm overhanging the side of the auger that the hopper will be
operating on.
2. Fasten the hopper lift arm assembly to the mount bracket with two lift arm
attach pins (10-21575) and linch pins (10-29998).
Figure 3.3 GULP2 Hopper Lift Arm
Table 3.3 Replacement Lift Arm
Model
Standard Lift Arm
GULP2 Lift Arm (Replacement )
130
10-20030
10-21538
160
10-20663
10-21538
HOPPER LIFT ARM
GULP2 LIFT ARM MOUNT
ASSEMBLY
Summary of Contents for GULP2 HOPPER MKX130
