Westfield GULP2 HOPPER MKX130, Assembly & Operation

Page: 12 / 62

2. S
AFETY
W
ESTFIELD
- GULP2 H
OPPER
MKX130
AND
MKX160 M
ODELS
12 30962 R1
2.11.1. Safety Equipment Required
First-Aid Kit
• Have a properly-stocked first-aid kit available for use should the need
arise, and know how to use it.
Fire Extinguisher
• Provide a fire extinguisher for use in case of an accident. Store in a highly
visible and accessible place.
2.12. Safety Decals
• Keep safety decals clean and legible at all times.
• Replace safety decals that are missing or have become illegible. See decal location
figures that follow.
• Replaced parts must display the same decal(s) as the original part.
• Replacement safety decals are available free of charge from your distributor,
dealer, or factory.
2.12.1. Decal Installation/Replacement
1. Decal area must be clean and dry, with a temperature above 50°F (10°C).
2. Decide on the exact position before you remove the backing paper.
3. Align the decal over the specified area and carefully press the small portion with the
exposed sticky backing in place.
4. Slowly peel back the remaining paper and carefully smooth the remaining portion of
the decal in place.
5. Small air pockets can be pierced with a pin and smoothed out using the sign backing
paper.
2.12.2. Safety Decal Locations and Details
Replicas of the safety decals that are attached to the equipment and their messages are
shown in the figure(s) that follow. Safe operation of the equipment requires that you
familiarize yourself with the various safety decals and the areas or particular functions
that the decals apply to, as well as the safety precautions that must be taken to avoid
serious injury, death, or damage.
Westfield reserves the right to update safety decals without notice. Safety decals may
not be exactly as shown.