W
ESTFIELD
- GULP2 H
OPPER
2. S
AFETY
MKX130
AND
MKX160 M
ODELS
30962 R1
9
2.7. Guards Safety
• Install guards to prevent contact with moving parts.
• Do not operate equipment unless all guards are in place.
• Do not walk or step on guards.
• Lock out power before removing a guard.
• Ensure all guards are replaced after performing maintenance.
2.8. Hand Winch Safety
Where equipped:
• Inspect lift cable before using. Replace if frayed or damaged. Make sure lift cable is
seated properly in cable sheaves and cable clamps are secure.
• Tighten brake lock by turning winch handle clockwise at least two clicks after lower-
ing equipment.
• Lower equipment fully before towing, then rotate winch handle until cable has light
tension.
• Do not lubricate winch brake discs.
2.9. Work Area Safety
• Have another trained person nearby who can shut down the
equipment in case of accident.
• The work area should be kept clear of bystanders.
• Keep the work area clean and free of debris.
Summary of Contents for GULP2 HOPPER MKX130
