Western Digital OpenFlex E3000 User Manual Download Page 179

Page: 179 / 179

User Guide

5. Regulatory

5.5 KCC Notice (Republic of Korea Only), Class A ITE

This is a Class A product based on the Technical Requirement of the Voluntary Control Council for

Interference by Information Technology (VCCI). In a domestic environment, this product may cause radio

interference, in which case the user may be required to take corrective actions.

5.5

KCC Notice (Republic of Korea Only), Class A ITE

English translation:

Please note that this device has been approved for business purposes with regard to electromagnetic

interference. If you find that this device is not suitable for your use, you may exchange it for a non-business

device.

5.6

Taiwan Warning Label Statement, Class A ITE

English translation:

This is a Class A product. In a domestic environment, this product may cause radio interference, in which

case, the user may be required to take adequate measures.

172

Summary of Contents for OpenFlex E3000




















































































































































































Search results

Summary of Contents for OpenFlex E3000

Reviews:

Brands by name

Popular brands

Western Digital OpenFlex E3000, User Manual

Search results

Summary of Contents for OpenFlex E3000

Reviews:

Brands by name

Popular brands