User Guide
3. Management
3.2 Part Replacement
Figure 200:
Fan Module Secure
d.
Verify that the Fan Module is securely latched into the chassis by pulling on the release
handle and ensuring the Fan Module does not move when pulled. Reinstall the Fan Module
if it is not securely installed into the chassis.
3.2.2
PSU Replacement
Be careful not to remove both power cables if performing a hot-swap of a PSU. The system needs one PSU
running to prevent data disruption.
Table 33:
Replacement Procedure Info
Required Tools
# of People Required
Time Required
None
1
3 minutes
Step 1 :
Unpack and inspect the new PSU for damage.
a.
Inspect the packaging that the PSU replacement was shipped in and record any damage to
the box. Large cuts, open boxes, and crushed corners should be reported.
b.
Remove the PSU from the packaging and verify that there is no damage to the PSU. Dents,
scratches, and broken parts should be reported. If major damage has occurred to the PSU,
DO NOT use the replacement part.
c.
Store in a safe location until the PSU is needed for installation.
Step 2 :
Disconnect the power cable from the failed PSU.
116
