User Guide
3. Management
3.2 Part Replacement
Figure 269:
Remove Chassis
Step 9 :
Install the new Chassis into the rack.
Tip:
A T15 Torx screwdriver is required for this step.
a.
Carefully slide the chassis onto the rails' inward-facing flanges until the chassis mounts are
flush with the mounts on the rails:
Figure 270:
Chassis Installation
b.
Use a T15 Torx screwdriver to install three M5 screws in each rack ear (6 total), securing the
chassis to the vertical rack rails:
153
