User Guide
3. Management
3.2 Part Replacement
Figure 232:
Rack Mount Rail Removal
d.
Remove the remaining rail in the same way the first was removed.
Step 7 :
Install the new Rack Mount Rails.
Tip:
A T15 Torx screwdriver with torque measuring capabilities is recommended
for this step.
a.
Determine which of the rails is the right and which is the left. The front of the rail can be
identified by the single rack mount pin, and the rear of the rail can be identified by the two
rack mount pins, as shown in the following image. Another way to orient the rails correctly
is to ensure that the shelf-flanges that support the enclosure are facing toward each other,
where the enclosure will reside.
Figure 233:
Rails Identification
134
