User Guide
3. Management
3.2 Part Replacement
Figure 244:
Secure OpenFlex F3x00
e.
Verify that the F3x00 is securely latched into the chassis by pulling on the latch and
ensuring the device does not move when pulled. Reinstall the device if it is not securely
installed into the chassis.
Note:
The blue and amber LEDs will illuminate, followed shortly by the green
LED. All three LEDs will remain illuminated for just over a minute until the
device is initialized. Once the device is initialized, the amber and blue LEDs
will turn off, and the Device Status LED that encircles the device release
button will illuminate, indicating that the SPDK services are running. Wait time
is
not
required between the installation of multiple OpenFlex F3x00 devices.
f.
Install each device in the same way the first was installed, and be sure to follow the
installation order depicted in the following figure.
140
