250050 R1
123
4. Slide two 5/16" eye-bolts (7) onto the pivot arm (2) and insert the end of the pivot arm through the spring
bracket and push nut (21).
5. Slide the remaining spring (15) onto the pivot arm.
a. Fasten the remaining 3/8" x 1-½" bolt to the other arm bracket and insert push nut.
b. Hook the other spring leg under the bolt.
6. Clip the ends of the springs onto the pivot arm. (Lower the pivot arm down into the roof to make this
easier.)
7. Bolt the rope arm (1) to the cap using a 5/16" x 3/4" bolt.
a. Bolt the rope arm bracket (27) to the cap with a 3/8" eye-bolt (10) and fasten the bracket to the rope
arm.
b. Do not tighten the rod eye-bolt.
c. Overlap the second rope arm using the 5/16" x 2" bolt (22).
d. Install a 5/16" x 2" bolt and nut to the end of the rope arms and fasten the cable (6) to bolt with a cable
clamp (16).
Figure 93.
Rope Arm Detail
ROPE ARM
OVERLAP DETAIL
10
19
12"
20
18
17
6
16
19
16
1
2
2
8. Pull the pivot arm up and insert a 2x4 across the peak ring and under the pivot arm.
9. Attach a nut to each pivot arm eye-bolt.
a. Make sure the nuts are threaded down to the end of the thread.
b. Place a cap over the eye-bolts and tighten the nuts on top.
EASYDRY® WIDE-CORR CENTURION® GRAIN BIN – GRAIN BIN DRYER
