Welch Allyn Propaq LT 802LT0N, Service Manual

Page: 13 / 80

Service Manual Overview 9
Related documents
Controls
Service menu
To access the monitor service menu:
From any main display screen (such as Large Numerics, Dual Waveform, ...):
1. Highlight , HR/PR , SpO2 , NIBP , Resp , or , and then press .
2. Highlight Setup (at the bottom of the screen) and press . The setup menu appears.
3. Scroll right ( ) to highlight Service , and press . The service menu appears, with
NIBP and Show Info highlighted.
Title Reorder Number
Propaq LT Vital Signs Monitor Directions for Use 810-1828-XX
Monitor
Power - Turn the monitor power on or off. Down - Move the cursor down to the next display
item.
Action - Act based on what is highlighted. Silence/Reset - Silence the current alarm tone for
90 seconds or reset a silenced alarm tone.
Left - Move the cursor left to the next display
item; decrease the parameter value. Display - Cycle to the next configured display
format, or cancel the current control, setup, or
pop-up menu.
Right - Move the cursor right to the next
display item; increase the parameter value. Snapshot - Record a 21
-
second period of numeric
and waveform data.
Up - Move the cursor up to the next display
item. Start/Stop NIBP - Start or stop an NIBP
measurement.
Cradle
Monitor Release - Press and hold while removing the monitor from the cradle.
II 1mV/cm II 1mV/cm
Exit Exit Trends Trends Snapshots Snapshots Setup Setup
Low Low Med Med
80 80
HR/min HR/min
140/78 140/78
NIBP mmHg (102) NIBP mmHg (102) Resp/min Resp/min SpO2 SpO2
Off Off On On
Alarm Tone Alarm Tone
Suspend Audible Alarms: Suspend Audible Alarms:
Setup: Setup:
(90 sec) (90 sec)
12 12 97 97
% %
HALL, ROBERT E. HALL, ROBERT E. 3456187 3456187 3:00:06P 3:00:06P
Adult, Adult, Rm 239 Rm 239
Alarms Alarms ECG ECG NIBP NIBP Timings Timings
High High
Service Service
Configuration Configuration
Setup Menu