Welch Allyn Propaq Encore, Service Manual

Page: 9 / 130

2
5
Overview
Purpose and Scope
The Propaq Encore Service Manual is intended as a reference for monitor maintenance
and repair to the field replaceable unit (FRU) level (
“Field Replaceable Units (FRUs)” on
page 117). This manual provides the technically qualified service person with
troubleshooting information, repair procedures, and calibration and performance
verification instructions. A technical overview of the monitor subsystems is provided as an
introduction to the device’s circuitry and pneumatics.
This manual is intended for the technically qualified service person. Service training
classes on Welch Allyn’ products are available. Contact Welch Allyn Technical Service for
information.
Other Applicable Documents
Several other documents are available for the Encore monitor. Refer to those documents
for other than maintenance and repair information. Check the
Encore Reference Guide for
information on other user’s documentation.
Unpacking Procedure
Use the following guidelines when unpacking the Encore monitor from its shipping
carton.
1. Before opening the Encore monitor shipping carton, check it for damage.
2. If damage is apparent, stop unpacking the carton and contact the shipping company
for further instructions. If the carton is intact, unpack the Encore monitor.
3. With the Encore monitor out of its carton, check to see that all the items listed on the
packing slip (provided with shipment) are in the shipping carton.
4. If an item is missing, first recheck the carton, then check with your receiving
department. If necessary, contact Welch Allyn at the address and phone number
shown below.
Note Configurations vary nationally. Some early versions of the Propaq Encore do not
include impedance pneumagraphy (RESP) in some countries.
Title Part Number
Propaq Encore Reference Guide, English 810-0640-XX
Products & Accessories Guide 810-0409-XX