5.
Add cleaning agent from the single-measure dispensing bottles to the
inside of the oven cavity.
If necessary, remove the loading trolley from the oven cavity to do so
and then slide it back in.
6.
Close the unit door.
7.
Wait for the cleaning phase to be done (approx. 30 – 60 minutes de-
pending on the selected cleaning profile).
8.
■
Once the cleaning phase is done, the unit will make an acoustic sig-
nal to let you know.
■
You will be prompted to add rinse aid to the inside.
■
The software will indicate how many single-measure dispensing bot-
tles are needed.
In exceptional cases, you can skip adding rinse aid depending on the
water hardness and the degree of scale build-up in the unit.
9.
Open the unit door.
10.
Add rinse aid from the single-measure dispensing bottles to the inside
of the oven cavity.
If necessary, remove the loading trolley from the oven cavity to do so
and then slide it back in.
11.
Close the unit door.
12.
Wait for the last cleaning phase to be done (approx. 20 – 30 minutes
depending on the selected cleaning profile).
13.
■
Once the last cleaning phase is done, the unit will make an acoustic
signal to let you know.
■
Follow the software's prompts.
14.
■
Open the unit door and check to make sure that everything has
been cleaned properly. The oven cavity should be visibly clean and
should not give off any smells typical of food leftovers or cleaning
agents.
■
Check the oven cavity to make sure that no foreign objects got in
during rinsing. If there are any foreign objects, remove them.
■
If additional cleaning is required, clean and rinse the oven cavity
manually or by running a cleaning profile once again.
15.
Empty the loading trolley's condensate collecting tray and rinse it with
water.
16.
Leave the unit door ajar in order to let the oven cavity dry out.
5 How to Clean the Combi Oven
Operating Manual
73