Removing the halogen lamp
1.
Remove the four oven light hex screws using the socket wrench.
Due to its design, the assembly consisting of the screws, bezel, glass
pane, seal, and bracket will remain together when the screws are un-
screwed.
2.
Remove the entire assembly from the oven wall .
3.
Reach into the reflector housing through the opening on the oven
wall and pull out the halogen lamp upwards in a straight line.
Installing the halogen lamp
1.
■
Follow the same steps used to remove the halogen lamp, but in op-
posite order.
When doing so, tighten the screws without applying too much force
so that the reflector housing will be sealed against moisture (the
glass may jump out from its place if you tighten the screws too tight-
ly).
■
Once you are done, remove all objects from the oven cavity. Then
rinse or wipe the oven cavity clean.
6 How to Perform Maintenance on the Combi Oven
Operating Manual
113