4.3.5 Using the external core temperature probe or sous vide probe
For your safety when working with/on the combi oven
Before starting work, read and understand the rules, risks, and hazards specified in the 'For Your Safety on page 17' section
and in these instructions and follow all the corresponding instructions without exception.
Procedures that you must be familiar with
You will need to be familiar with the following steps:
■
Safely Opening and Closing the Unit Door
41
■
Putting Away and Removing the Core Temperature Probe
55
How it works
In addition to the internal core temperature probe that is permanently connected inside the oven, you can temporarily con-
nect an additional external core temperature probe or sous vide probe on the outside of the unit case. The internal core
temperature probe will be deactivated the moment the external connector is used. In other words, the unit's software will give
priority to the external core temperature probe or sous vide probe when cooking. The internal core temperature probe CAN-
NOT be used simultaneously with the external core temperature probe and/or sous vide probe when cooking. Likewise, you
will not be able to use the internal core temperature probe when an external core temperature probe or sous vide probe is
connected.
Prerequisites
■
The external core temperature probe or sous vide probe must have already been cleaned. Moreover, it must be fully
functional and ready to go.
■
The food being cooked must have already been placed properly inside the oven cavity.
Connecting and using the external core temperature probe or sous vide probe
1.
Open the protective cap on the connector for the external core temper-
ature probe or sous vide probe. The connector is located on the right
above the operating panel on the unit case.
2.
Plug the external core temperature probe or sous vide probe into the
unit using the connector.
3.
Open the unit door.
4.
Insert the core temperature probe or sous vide probe into the food.
5.
Close the unit door.
Pay attention to the cable when doing so. When being routed into the
oven, the cable must not go through the door handle locking mecha-
nism's area. Instead, it can be routed through any other point so that it
will be held in place between the unit door and the hygienic plug-in
gasket.
4 How to Cook with Your Combi Oven
Operating Manual
56