6.3.2 Replacing the oven light halogen lamp
For your safety when working with/on the combi oven
Before starting work, read and understand the rules, risks, and hazards specified in the 'For Your Safety on page 17' section
and in these instructions and follow all the corresponding instructions without exception.
Procedures that you must be familiar with
You will need to be familiar with the following steps:
■
Safely Opening and Closing the Unit Door
41
Spare parts included
As indicated in the spare parts list, the required spare part is:
■
One (1) 12 V halogen lamp
Required tools
You will need the following tools:
■
Socket wrench with a width across flats of 8 mm
Handling the halogen lamp
Always wear clean gloves when grabbing halogen lamps (alternatively, you can use a cloth). Do not touch the bulb in new
halogen lamps, or halogen lamps that you will be reusing, with your bare fingers.
If the halogen lamp cannot be removed completely, e.g., the terminals are stuck, contact a service technician immediately.
Prerequisites
Check whether the following prerequisites are met:
■
The combi oven has been de-energized and locked and tagged out.
■
The oven cavity must have cooled down to a temperature of less than 140 °F since the last time it was used.
■
The loading trolley must have been removed from the oven cavity.
■
The halogen lamp has already cooled down.
■
The new halogen lamp has been inspected for damage and is not damaged.
6 How to Perform Maintenance on the Combi Oven
Operating Manual
112