3.
Vertically push the bottle into the pointed tip at the center of the oven
drain so that the tip will pierce the seal.
4.
■
Let the bottle sit vertically on the pointed tip for about 10 seconds so
that there will be enough time for all the liquid to come out.
■
Visually check whether all the liquid has come out. The single-
measure dispensing bottle is made of a transparent material that
makes it possible to see whether there is any liquid still inside.
■
If necessary, squeeze the remaining liquid out of the single-measure
dispensing bottle while it is still on the pointed tip.
5.
Risk of food being contaminated by cleaning agent or rinse aid
■
Do not put empty single-measure dispensing bottles down on the
work surface, as drops of cleaning agent or rinse aid may run down
along the outside of the bottles.
■
Use plenty of clean water to wipe clean all surfaces outside the
oven cavity that may have cleaning agents or rinse aid on them and
on which food will be prepared afterwards.
■
Once you are done, carefully remove the bottle from the pointed tip.
■
Remove the bottle from the oven cavity.
■
Repeat steps 2 through 5 if the software prompts you to use more
than one single-measure dispensing bottle to add cleaning agent or
rinse aid to the inside of the oven cavity.
6.
Close the unit door.
5 How to Clean the Combi Oven
Operating Manual
101