19
open until a car passes by or the close button is pressed.
F-11 Locking time of opening to up limit
After horizontally opening to limit position, it will lock the barrier motor for a period
of time according to the set value.
F-12 Locking time of closing to down limit
After horizontally closing to limit position, it will lock the barrier motor for a period
of time according to the set value.
F-13 Power-on self-learning speed
This command can set different speeds for finding the up limit and down limit. After
entering the menu, the first setting is the speed for finding the up limit. The LED
displays "1-XX". XX means the speed for finding the up limit. The speed can be
adjusted by pressing the two buttons of
“▲
/+
”
and
“▼
/-
”
. After the up limit speed
setting is completed, press the "
" button, the LED displays "2-XX", and XX
indicates the speed of finding the down limit. The speed can also be adjusted by
pressing the two buttons "
▲
/+" and "
▼
/-". Finally, after the up and down limit
speeds are set well, press the "
" key to save the parameters. If you press the "
■
/QUIT" key during the setting process, the set parameters are invalid.
F-14 Remote control learning
This item is used for the remote control learning of the 3-wire radio receiver of the
slave motor. It is only used when the main motor fails and the slave motor is used to
control the barrier gate. After entering the remote control learning menu item, the
number of remote controls currently learned is displayed. Long pressing and hold any
button on the remote controller for 1 second, the digital tube displays the number of
learned remote controllers plus 1. After the learning is completed, press the “
”
or “
■
/QUIT ” to exit the learning.
Note: Clear the remote controller in the H-09 item of the advanced menu.
F-15 Sensitivity of Auto-reversing on obstruction
When the barrier gate is blocked and stopped for more than the set time, the gate will
rebound and turn to open, and the LED will display the word Er.ob. The smaller the
value, the higher the sensitivity, otherwise the lower the sensitivity.
4.8. "Advanced Menu" Command List of Slave Motor
"Advanced menu" access method: Simultaneously long press the "
" and
"
■
/QUIT" button for 2 seconds to enter , the LED will display "H-XX".
The advanced menu is used by professional technicians, and general
users should use it with caution! Do not change the menu of the serial number not
listed in the table at will, it may cause abnormal operation of the barrier gate.
