49
50
19
49. Wrap the Leg Lever Cable (82) around a 90mm
Pulley (37). Attach the Pulley and a Cable Trap
(44) to the Butterfly Upright (4) with an M10 x
120mm Bolt (61) and an M10 Nylon Locknut (74).
Do not tighten the Nylon Locknut yet. Be sure
that the Cable Trap is turned to hold the Cable
in the groove of the Pulley
.
4
74
44
82
37
61
50. Wrap the Leg Lever Cable (82) around the 90mm
Pulley (37) removed in step 42. Attach the Pulley
to the bottom of the Double “U”-Bracket (42) with
an M10 x 45mm Bolt (96) and an M10 Nylon
Locknut (74).
37
96
82
42
74
51. Remove the M10 Nylon Locknut (74) used in step
49.
Wrap the Leg Lever Cable (82) around a 90mm
Pulley (37). Attach the Pulley and a Cable Trap
(44) to the M10 x 120mm Bolt (61) in the Butterfly
Upright (4) with an M10 Nylon Locknut (74).
Be
sure that the Cable Trap is turned to hold the
Cable in the groove of the Pulley
.
51
37
74
44
4
61
82
52. Attach the end of the Leg Lever Cable (82) to the
Leg Lever (8) with an M10 x 70mm Short Thread
Bolt (99), three M10 Washers (95), and an M10
Nylon Locknut (74).
Do not overtighten the
Nylon Locknut; the Cable must be able to
pivot freely
.
52
74
82
95
95
8
99
