14
30. Wrap the Press Cable (80) around a “V”-Pulley
(38). Attach the Pulley and a Long Cable Trap
(50) to the indicated hole in the Press Seat
Frame (12), using an M10 x 105mm Bolt (69), an
M10 Large Washer (40) and an M10 Nylon
Locknut (74).
Be sure the Cable Trap is turned
to hold the Cable in the groove of the Pulley.
30
29. Insert an M10 x 120mm Bolt (61) through a
90mm Pulley (37), a Cable Trap (44), and the Leg
Press Arm (22) from the indicated side.
Be sure
the Cable Trap is oriented as shown.
Wrap the Press Cable (80) around another 90mm
Pulley (37). Attach the Pulley and a Cable Trap
(44) to the M10 x 120mm Bolt (61) with an M10
Nylon Locknut (74).
Be sure the Cable Trap is
turned to hold the Cable in the groove of the
Pulley. Do not tighten the Nylon Locknut yet.
29
44
44
61
22
74
80
74
69
38
40
22
44
12
50
80
80
37
31. Wrap the Press Cable (80) around the indicated
90mm Pulley (37) on the Leg Press Arm (22).
Make sure the Cable Trap is turned to hold the
Cable in the groove of the Pulley.
Tighten the
M10 Nylon Locknut (not shown) used in step 29.
32. Wrap the Press Cable (80) around a 90mm
Pulley (37). Attach the Pulley and a Cable Trap
(44) to the Support Brace (7) with an M10 x
95mm Bolt (62), an M10 Washer (95), and an
M10 Nylon Locknut (74).
Make sure the Cable
Trap is turned to hold the Cable in the groove
of the Pulley.
31
32
37
37
95
74
7
80
44
62
37
