13
27. Wrap the Press Cable (80) around a 90mm
Pulley (37). Attach the Pulley and a Cable Trap
(44) to the Press Upright (6) with an M10 x 95mm
Bolt (62), an M10 Washer (95), and an M10
Nylon Locknut (74).
Make sure the Cable Trap
is turned to hold the Cable in the groove of
the Pulley.
27
80
44
37
74
95
62
6
28. Wrap the Press Cable (80) around a 90mm
Pulley (37). Attach the Pulley and a Cable Trap
(44) to the bottom of the Press Upright (6) with an
M10 x 95mm Bolt (62), an M10 Washer (95), and
an M10 Nylon Locknut (74).
Make sure the
Cable Trap is turned to hold the Cable in the
groove of the Pulley.
28
80
44
74
95
62
37
6
26. Wrap the Press Cable (80) around a 90mm
Pulley (37). Attach the Pulley to the other side of
the Press Frame (14) with an M10 x 85mm Bolt
(88), an M10 Washer (95), and an M10 Nylon
Locknut (74).
26
14
88
95
80
74
25. Wrap the Press Cable (80) around a “V”-Pulley
(38). Attach the Pulley and a Long Cable Trap
(50) to the Press Upright (6) with an M10 x 95mm
Bolt (62), an M10 Washer (95), and an M10
Nylon Locknut (74).
Be sure the Cable Trap is
turned to hold the Cable in the groove of the
Pulley.
25
38
62
80
95
6
50
74
37