Weichai America Corp.
21
1.
Disassemble the flywheel housing bolts;
2.
Disassemble the flywheel housing hexagon bolts and inspection port cover plate;
3.
Disassemble the flywheel housing.
2.8.4 Assembling Steps of Flywheel Housing
1.
Apply some sealant around the oil cavity.
2.
Assemble the flywheel housing into the engine block.
3.
Fasten the flywheel housing bolts.
4.
Assemble the starter into the flywheel housing and fasten the bolt.
2.8.5 Inspection and repair of flywheel housing
1.
Symmetrically tighten up the flywheel housing bolts in the order shown in the figure below.
Before assembly, apply oil to the bolt flange face. Each flywheel housing bolt can be
repeatedly used twice.
Figure 2-12 Fastening Order of Flywheel Housing Bolt
2.
Apply sealant onto the junction surface of cylinder block and flywheel housing, and strictly
prevent bump during hoisting the flywheel housing.
WEICHAI & PSI SERVICE MANUALS AVAILABLE ONLINE AT FLYPARTSGUY.COM
GET YOUR WEICHAI & AFTERMARKET SERVICE PARTS AT FLYPARTSGUY.COM
