56
6
DETAILED PARAMETER DESCRIPTION
This section describes in detail all the Soft-Starter parameters.
In order to facilitate the description, the parameters were
grouped by characteristics and functions
Read Parameters
Regulation Parameters
Configuration Parameters
Motor Parameters
Variables which can be seen
on the display, but they can
not be changed by the user.
They are adjustable values
and used according to the
Soft-Starter function
They define the Soft-Starter
characteristics, the functions
to be executed, as well as
the input/output functions.
It defines the rated motor
characteristics.
6.1- STANDARD
PARAMETER SET
AT FACTORY
The standard factory parameters are predefined values, with
which the Soft-Starter is programmed at factory. The set of
values is so selected to meet most applications, thus reducing
the reprogramming during the start-up. If necessary, the user
can change each parameter individually according to this
application. At any time the user can return to the standard
parameter set at factory, adopting the following procedures:
All set parameters will be lost (replaced by the factory
standard)
1)
Disabling the Soft-Starter
2)
Setting P00 = ON
3)
Setting P46 = ON.
4)
Pressing Key
5)
The display indicates "EEP" in the time of the "default"
values are loading.