4427 Dawson Street
Burnaby, B.C., Canada V5C 4B8
Office: 604.502-9007
Fax: 604.502-9044
Web:
www.webbelectronicsinc.com
Document Name: MWP-302 User Manual
4 o f 1 7
CONFIDENTIAL, Copyright © 2018
This document is proprietary to Webb Electronics Inc. It may not be copied or otherwise
distributed without the express consent of Webb Electronics Inc.
3 HOW THE WEBBPHONE WORKS
3.1
LOW-RISE APPLICATION (UP TO 6 STOREYS)
In a low-rise application, there can be up to 6 WebbPhones directly connected to a telephone
line in a party line configuration.
Note
: All WebbPhones connected to the same party line must be
programmed with a unique station
number. One of those station numbers must be ‘1.’ If only one phone is connected to the telephone
line, then its station number must be ‘1.’
3.1.1 CALLING OUT
The calling party presses the call button which:
Illuminates the LED
Causes the WebbPhone to sense if the line is in use
→
If the line is not in use, the phone will dial the primary phone number then the
secondary phone number (if programmed) every 30 seconds for up to six
switches between numbers.
→
If the line is in use, a voice prompt will advise the calling party that the call will be
attempted again in 30 seconds. The phone will repeatedly attempt to call the
same number up to 9 times. Every 3rd time, it will request the other users to hang
up their phone call.
3.1.2 CALLING IN
The calling party dials the telephone number associated with the telephone line
connected to the WebbPhone.
If the line is not busy, then all WebbPhones simultaneously answer after the
second ring. The WebbPhone with the station ID ‘1’ will play the prompt asking the
calling party to enter the station ID followed by the * key. Only the WebbPhone
with the matching station ID will answer the phone. All other WebbPhones on the
party line will hang up.
3.2
HIGH-RISE APPLICATION (GREATER THAN 6 STOREYS)
In high-rise application, up to 80 WebbPhones can be managed through a Lobby Station
(LS-250) and expansion stations (EX-250) as required. Each LS-250 and EX-250 can
handle a maximum of 10 phones.
3.2.1 CALLING OUT
The calling party presses the call button which:
Illuminates the LED
Causes the WebbPhone to sense if the telephone line or LS-250 are in use
→
If the line is not in use, the phone will dial the primary phone number then the
secondary phone number, if programmed.
→
If the telephone the line or LS-250 are in use, the call will go to call waiting. It will
attempt to redial the same phone number every 30 seconds, up to 9 times. Every
3rd time, it will request the other users to hang up their phone call.
3.2.2 CALLING IN
When receiving an in-coming call, the LS-250 will:
Answer with the prompt “Enter cab number you wish to speak to and then press the *
key.”
When the call is connected, you will hear the prompt “Connected.”
