background image

9

1.  Click on the 

Add Module

 icon in 

the toolbar.   A message window 

will appear and ask you to press the 

button on the module to add.
2.  Press and release the PRogRAM 

button on the Z-Wave

®

 module. If 

the module is successfully added 

you will be prompted to give it a 

name. Providing meaningful names 

for the modules makes network 

setup and control much easier. The 

new module will appear in the upper 

left part of the plan view in the 

window. You may move these icons 

around by clicking and dragging 

them into open spaces or into rooms 

(see Drawing a Floor Plan, page 12). 

Repeat this procedure if the module 

failed to be included.
To view the name of a Z-Wave

®

 

module in the plan window, hover 

over its icon with your mouse and 

the name will pop up automatically. 

If the module does not have a name, 

it will be named ‘unnamed’ and the 

internal Z-Wave

®

 node number

will follow in brackets.

NoTe:

  For your security, the USB 

Z-Wave

®

 Adapter must be within 3 

feet of the Z-Wave

®

 module to be 

added.  If this is not possible, please 

set up your network with a portable 

remote controller and then copy 

this information to the USB adapter 

(See “Joining Houseport

®

 to existing 

Networks”, page 23).
3.  Repeat Steps 1 and 2 for each 

module you wish to add to the 

network.

NoTe:

  Please see the User Manual or Instruction 

Manual for the specific Z-Wave

®

 module being 

programmed to locate the PRogRAM button and 

for specific programming information.  To add 

a new controller as a secondary controller to 

the network, please see the section “Adding a 

Controller to the Network” page 25.

TIP:

  If the Z-Wave

®

 module fails to be included in 

the network it may have previously been used in 

another network and needs to be reset.  Press the 

ReMoVe DeVICe button in Houseport

®

 and then 

press and release the PRogRAM button on the 

Z-Wave

®

 module.

TIP:

  The process of adding modules to a network 

is often referred to as INCLUSIoN.

Adding Modules to the Network

Installation/Setup

 

      

ON/O

FF

    

  

 P

RO

G./D

IM

Press-and-Release 
PRogRAM button on 
module

Summary of Contents for Houseport USB Z-Wave WDUSB-10MAC







































Reviews: