Receiving Network Updates
24
Network Operations
Use the following procedure to
update network information in
Houseport
®
when Houseport
®
is a
secondary controller. When you
add or remove modules using
the Primary Controller, those
changes will not be reflected in
Houseport
®
.
1. Activate the RePLICATIoN SeND
mode on your Primary Controller.
This option may also be referred to
as ADD MoDULe, ADD CoNTRoLLeR
or RePLICATe NeTWoRk
INFoRMATIoN oNLY.
NoTe:
Please see the User Manual
for the specific Z-Wave
®
controller
being used for information on how
to Replicate Send or Copy To node
and scene information.
2. In Houseport
®
select the
Receive
Network Update
item from the
Network menu.
The controller will then
automatically send the Z-Wave
®
USB adapter a full listing of all the
modules in the network as well as
routing information. Any new
modules in the network (that
Houseport
®
does not already know
about) will appear in a row across
the top of the plan view. Any
modules that were already known
to Houseport
®
but are no longer in
the network will be marked with a
red question mark. These orphaned
icons can be removed from
Houseport
®
by selecting them and
pressing the delete key.
oN
oFF
1
2
3
4
5
6
DeLeTe
INCLUDe
example of
Primary
Controller