Waveshare WIFI232, User Manual

Page: 76 / 81

WAVESHARE ELECTRONICS
WIFI232 User Manual
Page 76 of 81
Figure 54
Configure Transparent Serial Port Connection (UDP)
Q4: Where to set WIFI232 module network protocol (TCP/UDP)?

WIFI232
network protocol setting see “Application Setting Page” as below Figure,

Protocol: TCP Server

Only Port ID required: 8899 (Default)
Figure 55
Module Network Protocols: TCP/Server

Protocol: TCP Client
 Application IP address required: it‟s target TCP server „s IP address;

Port ID required: 8899 (Default)
Figure 56
Module Network Protocol: TCP/Client

Protocol: UDP

No Server/Client selection required;
 Application IP address required: it‟s target device „s IP address;