WAVESHARE ELECTRONICS
WIFI232 User Manual
Page 77 of 81
Port ID required: 8899 (Default)
Figure 57
Module Network Protocol: UDP
Q5: How to configure transparent serial port application: Two WIFI
modules all configured as STA and connection through AP?
Network structure as below figure:
Module 1# Setting: ( We use WIFI232 as AP for this example)
Works as AP mode and all default setting;
Module 2# Setting:
Works as STA mode; --
See “Mode Selection Page”
WAN connection type: Static IP: 10.10.100.100;
--
See “STA Interface Setting Page”
Network Protocal:TCP/Server, Port ID: 8899;
--
See “Application Setting Page”
LAN IP address: 10.10.99.254 (Different net segment with WAN port);
--
See “AP Interface Setting Page”
Module 3# Setting:
Works as STA mode; --
See “Mode Selection Page”
WAN connection type: Static IP: 10.10.100.101;
--
See “STA Interface Setting Page”
Network Protocal:TCP/Client, Port ID: 8899; Application IP address: Module 2#‟s WAN
IP address (10.10.100.100);
--
See “Application Setting Page”
LAN IP address: 10.10.98.254 (Different net segment with WAN port);
--
See “AP Interface Setting Page”
