WAVESHARE ELECTRONICS
WIFI232 User Manual
Page 37 of 81
5 Web Accessing and AT+instruction set
5.1 Configuration via Web Accessing
When first use WIFI232 modules, user may need some configuration. User can connect to
WIFI232
module‟s wireless interface with following default setting information and configure the
module through laptop.
Table 6
WIFI232 Web Access Default Setting
Parameters
Default Setting
SSID
WIFI232
IP Address
10.10.100.254
Subnet Mask
255.255.255.0
User Name
admin
Password
admin
5.1.1 Open Web Management Interface
Step 1: Connect laptop to SSID “WIFI232” of WIFI232 module via wireless LAN card;
Step 2: After wireless connection OK. Open Wen browser and access “
http://10.10.100.254
”;
Step 3: Then input user name and password in the page as following and click “OK” button.
Figure 26
Open Web Management page
The WIFI232 web management page support English and Chinese language. User can select
language environment at the top right corner and click “Apply” button.
The main menu include five pages: “Mode Selection”,” AP Interface Setting”,”STA Interface
Setting”,”Application Setting”, “WEB IO”and “Device Management”
