WAVESHARE ELECTRONICS
WIFI232 User Manual
Page 65 of 81
+ok<CR>< LF ><CR>< LF >
Parameters:
Parameter: Max length is 20 bytes.
5.2.2.2.50
AT+WSSSIDA
Function:
Set/query the first AP„s ssid of 3 sta parameters settings .
Format:
Query Operation
AT+WSSSIDA<CR>
+ok=<ap’s ssid><CR>< LF ><CR>< LF >
Set Operation
AT+ WSSSIDA
=<ap’s ssid ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
ap‟s ssid: AP‟s SSID
This Instruction only effective for WIFI232 works as STA. After WIFI232 module boots up again, the
setting will be effective. But user can set this command when module configured as AP.
5.2.2.2.51
AT+WSSSIDB
Function:
Set/query the second
AP„s ssid of 3 sta parameters settings .
Format:
Query Operation
AT+WSSSIDB<CR>
+ok=<ap’s ssid><CR>< LF ><CR>< LF >
Set Operation
AT+ WSSSIDB
=<ap’s ssid ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
ap‟s ssid: AP‟s SSID
This Instruction only effective for WIFI232 works as STA. After WIFI232 module boots up again, the
setting will be effective. But user can set this command when module configured as AP.
5.2.2.2.52
AT+WSSSIDC
Function:
Set/query the third
AP„s ssid of 3 sta parameters settings .
Format:
Query Operation
AT+WSSSIDC<CR>
+ok=<ap’s ssid><CR>< LF ><CR>< LF >
Set Operation
AT+ WSSSIDC
=<ap’s ssid ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
ap‟s ssid: AP‟s SSID
This Instruction only effective for WIFI232 works as STA. After WIFI232 module boots up again, the
setting will be effective. But user can set this command when module configured as AP.
5.2.2.2.53
AT+WSKEYA
Function:
Set/query the first
AP„s password of 3 sta parameters settings .
