WAVESHARE ELECTRONICS
WIFI232 User Manual
Page 66 of 81
Format:
Query Operation
AT+WSKEYA<CR>
+ok=<auth,encry,key><CR>< LF ><CR>< LF >
Set Operation
AT+ WSKEYA=< auth,encry,key><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
auth: Authentication mode
OPEN
SHARED
WPAPSK
encry:Encryption algorithm
NONE: When “auth=OPEN”, effective
WEP: When “auth=OPEN” or “SHARED”, effective
TKIP: When ”auth= WPAPSK”, effective
AES: When “auth= WPAPSK”, effective
key: password, ASCII code, shall less than 64 bit and
greater than 8bit
This Instruction only effective for WIFI232 works as STA. After WIFI232 module boots up again, the
setting will be effective. But user can set this command when module configured as AP.
5.2.2.2.54
AT+WSKEYB
Function:
Set/query the second
AP„s password of 3 sta parameters settings .
Format:
Query Operation
AT+WSKEYB<CR>
+ok=<auth,encry,key><CR>< LF ><CR>< LF >
Set Operation
AT+ WSKEYB=< auth,encry,key><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
auth: Authentication mode
OPEN
SHARED
WPAPSK
encry:Encryption algorithm
NONE: When “auth=OPEN”, effective
WEP: When “auth=OPEN” or “SHARED”, effective
TKIP: When ”auth= WPAPSK”, effective
AES: When “auth= WPAPSK”, effective
key: password, ASCII code, shall less than 64 bit and
greater than 8bit
This Instruction only effective for WIFI232 works as STA. After WIFI232 module boots up again, the
setting will be effective. But user can set this command when module configured as AP.
5.2.2.2.55
AT+WSKEYC
