WAVESHARE ELECTRONICS
WIFI232 User Manual
Page 59 of 81
num: 1~32, default 32. maxima TCP connection;
When configure as TCP/Server, WIFI232 support maxima 32 TCP connections. If not require so much
connection, user can resetting this parameters.
5.2.2.2.27
AT+TCPB
Function: Open/Close TCPB function;
Format:
Query Operation
AT+TCPB<CR>
+ok=<sta><CR>< LF ><CR>< LF >
Set Operation
AT+ TCPB=<on/off><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
sta: TCPB enable status
on, TCPB enable
off, TCPB disable
After WIFI232 module boots up again, the setting will be effective.
5.2.2.2.28
AT+TCPPTB
Function: Set/Query TCPB port number;
Format:
Query Operation
AT+TCPPTB<CR>
+ok=<port><CR>< LF ><CR>< LF >
Set Operation
AT+ TCPB=<port><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
port: decimal ,<65535
After WIFI232 module boots up again, the setting will be effective.
5.2.2.2.29
AT+TCPADDB
Function: Set/Query TCPB server address;
Format:
Query Operation
AT+TCPADDB<CR>
+ok=<add><CR>< LF ><CR>< LF >
Set Operation
AT+ TCPADDB=<add><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
add: TCPB server address, can be IP address or url.
After WIFI232 module boots up again, the setting will be effective
