Wavelet 16-ch Digital Video Recorder Instruction Manual Download Page 122

Page: 122 / 152

WAVELET DIGITAL VIDEO RECORDER

121

⑦

Add To List

When a DVR is entered manually, click on

Add To List

after entering all the values.

⑧

Del From List

When a DVR needs to be removed from the list, highlight the DVR to be removed,
and then click on

Del From List

⑨

Setup

If the settings of the DVR needs to be modified after adding the DVR, click on

Setup

to open the DVR settings window.

⑩

Property

Property displays general information about a DVR, such as DVR name, IP address,
connection port, Model number, CPU and MICOM version, number of cameras and
the compression method.

18. VIRTUAL DVR SET LIST MANAGER

Virtual DVR Set List Manager is used to add or remove Virtual DVRs.

①

③

②

④

⑤

⑥

⑦

⑧

⑨

⑩

Summary of Contents for 16-ch Digital Video Recorder

























































































































































Search results

Summary of Contents for 16-ch Digital Video Recorder

Reviews:

Related manuals for 16-ch Digital Video Recorder

Brands by name

Popular brands

Wavelet 16-ch Digital Video Recorder, Instruction Manual

Search results

Summary of Contents for 16-ch Digital Video Recorder

Reviews:

Related manuals for 16-ch Digital Video Recorder

Brands by name

Popular brands