Watlow Controller Series D8, User Manual

Page: 54 / 179

D8 Series User’s Guide
Chapter 3: Communicating by DeviceNet
54
NOTE! All successful explicit message responses from a Set service will contain no data.
The response will be a two-byte message containing the requester’s node address and
service code (with R/R bit set).
Output Object
The Output Object provides read/write access to all output parameters. Instance 0 of this object
contains the class attributes listed in Table 3.20. The four-loop controller has four additional
instances, and the eight-loop controller has eight additional instances, each containing the attributes
listed in Table 3.21. Instance 1 corresponds to loop 1, instance 2 corresponds to loop 2, and so on.
Table 3.19 – Output Class and Services
Class Code 65 hex
Class Services 0E hex Get Attribute Single
Instance Services
0E hex Get Attribute Single
10 hex Set Attribute Single
Table 3.20 – Output Class Attributes (Instance 0)
ATTRIBUTE ACCESS NAME TYPE DESCRIPTION
1 (1 hex) Get Revision UINT Revision of this object
2 (2 hex) Get Max instance UINT Maximum instances of this object (8)
3 (3 hex) Get Number of instances UINT Number of object instances
Table 3.21 – Output Instance Attributes (Instances 1 to 4 or 8)
ATTRIBUTE ACCESS NAME TYPE DESCRIPTION
100 (64 hex) Get/Set Heat Output UINT See page 96.
101 (65 hex) Get/Set Cool Output UINT See page 96.
102 (66 hex) Get/Set Heat Output Type USINT See page 116.
103 (67 hex) Get/Set Cool Output Type USINT See page 116.
104 (68 hex) Get/Set Heat Action BOOL See page 118.
105 (69 hex) Get/Set Cool Action BOOL See page 118.
106 (6A hex) Get/Set Heat Cycle Time USINT See page 117.
107 (6B hex) Get/Set Cool Cycle Time USINT See page 117.
108 (6C hex) Get/Set Heat Power Limt UINT See page 118.
109 (6D hex) Get/Set Cool Power Limit UINT See page 118.
110 (6E hex) Get/Set Heat Power Limit Time UINT See page 119.
111 (6F hex) Get/Set Cool Power Limit Time UINT See page 119.
112 (70 hex) Get/Set Sensor Fail Heat Output UINT See page 119.
113 (71 hex) Get/Set Sensor Fail Cool Output UINT See page 119.
114 (72 hex) Get/Set Open Thermocouple Heat Output Average BOOL See page 120.
115 (73 hex) Get/Set Open Thermocouple Cool Output Average BOOL See page 120.
116 (74 hex) Get/Set Heat Output Curve USINT See page 120.
117 (75 hex) Get/Set Cool Output Curve USINT See page 120.