WATERS CORPORATION 2424, Operator'S Manual, Page: 46 / 196

2-16 Setting up the Detector
To route the siphon drain tubing to the rear of the detector
1. Using a Phillips screwdriver, remove the front left-hand screw that
secures the detector cover.
2. Insert the screw through the hole in the siphon drain tubing bracket,
and align the screw and bracket with the hole that you removed the
cover screw from.
3. Using a Phillips screwdriver, secure the bracket to the front, left side of
the detector.
Siphon drain tubing bracket installation
4. Route the rear siphon drain tubing through the siphon drain tubing
bracket to the rear of the unit.
Siphon drain
tubing bracket
Left front side
of detector