Waterous AQUIS Series, Installation, Operation And Maintenance Instructions

Page: 30 / 90

30
|
90
Safety Introduction Product Overview Installation Operation Maintenance Troubleshooting Service Parts Warranty
Master Waterway Check Valve
This valve ensures that the water and concentrate flow in one direction
( Figure 14 ). It prevents the mix flowing into the water tank or pump. The check
valve is available in the following configurations:
1-1/2-inch valve
Inlet: Victaulic (1-1/2 inches) FNPT (1-1/2 inches)
Outlet: Combination: Victaulic (2 inches) and FNPT (1-1/2 inches)
2-inch valve
Inlet: Victaulic (2 inches) Victaulic (2 inches)
Outlet: Victaulic (2 inches) FNPT (2 inches)
2-1/2-inch valve
Inlet: Victaulic (2-1/2 inches) Victaulic (2-1/2 inches)
Outlet: Victaulic (2-1/2 inches) FNPT (2-1/2 inches)
2
1
1. Check valve 2. Injector
Figure 14
Concentrate Injector
This fitting injects the concentrate into the waterway to create the
solution in the apparatus ( Figure 14 ).
Note: You can move the fitting to the opposite side to fit your application.
Drain Port
The drain port on the check valve allows the unused solution to empty
through a dedicated line after use ( Figure 15 ).
1
1. Drain port
Figure 15