35
|
90
Safety Introduction Product Overview
Installation Precautions
The foam system is intended to be installed by a person or persons with
the basic knowledge of installing similar equipment. Contact Waterous with
questions about installing the foam system.
Disconnecting the Frame Ground
The foam system uses a frame ground to operate. Performing high
voltage or high current operations, while the foam system is connected
to the frame, can damage the electronics in the control box.
NOTICE
High current from welding
or jump start can damage
electronic components.
•
Disconnect all ground
wire connections before
jumping or welding.
•
High Current
Avoid damaging the electronics in the control box. Disconnect
the frame ground before jump starting, welding, plasma cutting
or conducting other high voltage or high current operations to the
apparatus.
Modifying the Foam System
The foam system components are designed to operate mounted to
the mounting bracket. Removing the components from the mounting
bracket (
,
and
) and installing them
independently, can damage the components, and will void your
warranty.
NOTICE
Modifying the equipment
can damage components
and void your warranty.
•
Do not modify the foam
system.
•
Modification
Do not modify the foam system or any of its components. Doing so
will void your warranty.
