61
|
90
Safety Introduction Product Overview
Editing the Default Mix Percentage—F1
1. Enter the calibration/setup mode. Refer to:
"Entering the Calibration/Setup Mode" on page 60.
2. Navigate to
(F1 parameter).
3. Press the
(SELECT button) to edit the parameter.
4. Press the
or
(up or down button) to display the
desired foam percent.
The value displayed is between
(0.1 percent) to
(1.0 percent).
5. Press the
(SELECT button) to select the displayed value.
6. Press the
(FOAM button) to save the value and exit the
calibration and
s
etup mode.
Editing the Units of Measure—F2
1. Enter the calibration/setup mode. Refer to:
"Entering the Calibration/Setup Mode" on page 60
.
2. Navigate to
(F2 parameter).
3. Press the
(SELECT button) to edit the parameter.
4. Press the
or
(up or down button) to display the
desired unit of measure from the following choices:
•
US gallon
•
Imperial gallon
•
Metric liter
•
Liters per second
5. Press the
(SELECT button) to select the displayed value.
6. Press the
(FOAM button) to save the value and exit the
calibration and
s
etup mode.
